MedloftAdmin 
The increased validation requirements of MDR (EU 2017/745) bring new challenges to the manufacturers of devices utilizing software and standalone software which are considered as medical device in line with the Article 2 of the MDR. EN/IEC 62304:2006/A1:2015 is a basis standard which defines requirements for Medical Device Software Life Cycle Processes. In addition …
Proposal for transitional provisions for certain invitro diagnostic medical devices under Regulation (EU) 2017/746 European Commission issued a proposal (2021/0323 (COD)) for the amendment of the transitional provisions under EU Regulation 2017/746 on in vitro diagnostic medical devices (IVDR). Once approved by the council and parliament this will give more time for many IVD manufacturers …
MDR Clinical Evaluation Requirements including clinical investigation are defined on Chapter VI, Annex XIV and Annex XV respectively. As you know, to CE Mark a medical device under MDR, the importance of obtaining clinical data and evaluation is extremely important. Especially for implantable and Class III devices manufacturers shall implement a very carefully designed PMCF …
PMCF (Post Market Clinical Follow-Up) is maybe one of the most challenging new MDR (EU 2017/745) requirements. As many of you know, MDR has increased requirements for clinical evaluation and market surveillance. The importance of the clinical data shows its effects for post market surveillance as a more detailed PMCF process. Of course this shall …
Use of Harmonised Standards The MDCG 2021-5 Guidance on standardisation for medical devices explains the use of harmonised standards for demonstrating compliance to MDR (EU 2017/745 ) and IVDR (EU 2017/746) . Although this guidance document does not include new information, it is especially helpful for medical device start-ups and manufacturers, which are at the …
Food and Drug Administration (FDA) is the legal authority to establish rules and regulation for the use of medical devices within the United States. According to Food, Drug, and Cosmetic Act products falling within the scope of medical devices, shall be registered in FDA database. In that sense, FDA 510 K clearance is required for …
FDA issued a new page called “Biocompatibility Assessment Resource Center”, where you can find useful information for your biocompatibility evaluation. The web pages mainly include explanation of terms and concepts important for a biocompatibility evaluation of a medical devices. As you might already know, the general principals are already specified in the guidance document “Use …
Implant card (IC) is one of the new requirements of the MDR – EU 2017/745. The requirements specified in Article 18 will bring new challenges to the daily life of the implantable device manufacturers. The guidance MDCG 2019-8 includes useful hints, which will help the manufacturers during design of an IC. Before diving into details …
The first module of the EUDAMED (European Databank on Medical Devices ) is live as of 1st December of 2020. This will enable economic operators to get a Single Registration Number (SRN). MDR Registration Requirements As you know, Chapter III of the MDR EU 2017/45 deals with identification and traceability of medical devices including registration …
ISO 13485:2016 is a quality management standard for medical devices. This standard provides a basis for the quality management system in parallel to the EU MDR and other international regulatory changes which occurred since the second revision of the standard. On the other hand, this 2016 revision brought requirements closer to the US FDA expectations, …