IVDR EU 2017/746 CE Marking

The change journey of the EU medical device directives since 2012 was completed on 5 May 2017 with the publication of EU 2017/745 and EU/2017/746 in the EU official journal. EU 2017/746, which we are accustomed to briefly refer to as IVDR, entered into force on 26 May 2022. However, due to the COVID 19 …

How to Select a Notified Body (NB) for CE Marking

Many medical device’s manufacturers have difficulties in locating a notified body for CE Marking of their products. This article provides detailed information on the notified body selection criteria which could be implemented by manufacturers who are planning to put their medical devices on the EU market. Still with 30 NBs for MDR and 12 NBs …

IVDR & Risk Management

We all know that Risk Management is an important part of a medical device’s quality management system. It also plays an important role in establishing objective evidence for the conformity with the General Safety and Performance Requirements (GSPR) of the EU 2017/746 (IVDR) IVD Medical Device Regulation. When carrying out a risk assessment, the state-of-the-art …

Performance Evaluation Under EU 2017/746/ IVDR

Performance evaluation (PE) is an important part of design validation and technical documentation required to place an in vitro diagnostic device (IVD) on the EU market. Article 56 of the EU 2017/746 In Vitro Diagnostics Regulation (IVDR) requires manufacturers to prepare a performance evaluation report to demonstrate the safety and performance according to the manufacturer’s …

The official text of MDR extension has been published

European Commission published the official text of the proposal to extend the MDR transition period for legacy devices on 6 January 2023. The amendment has been formally adopted by both the European Parliament and the Council on 15 March 2023.On 20 March 2023,it has been published in the Official Journal and entered into force. As …

MDCG 2023-3 Guidance has been published

MDCG 2023-3-The guidance document on vigilance terms and concepts as outlined in the Regulation (EU) 2017/745 on medical devices has been published by MDCG. The purpose of this guidance is to clarify important terms and concepts that are outlined in Section 2 of Chapter VII of the Regulation (EU) 2017/745 on medical devices (MDR). This …

MDCG 2020-21 PSUR Guidance has been published

The guidance document MDCG 2020-21– Guidance on Periodic Safety Update Report (PSUR) according to Regulation (EU) 2017/745 which is highly anticipated has been published on 16 December 2022 by MDCG. The guidance document, which provides information about the content, format and frequency of preparation for the PSUR, which must be prepared during and after the …

ISO 14644-4 has been revised

ISO 14644-4 Cleanrooms and associated controlled environments — Part 4: Design, construction and start-up has been revised. ISO made some changes by renewing the standard, which was first published in 2001, at the end of last month. The main changes in the new version are as follows: 1. The normative content has been expanded;2. Added …

Common specifications for the groups of products without an intended medical purpose listed in Annex XVI of EU 2017/745 MDR

After the issue of implementing regulation for the reprocessing of single-use devices, EU Commission issued the implementing regulation 2022/2346 as regards common specifications (CS) for the groups of products without an intended medical purpose listed in Annex XVI of EU  2017/745 MDR.   The manufacturers who aim to produce the products covered by Annex XVI …